If you are looking to create an old-fashioned or rustic appeal in your home, brass door handles can be the right choice. This timeless material has been used for centuries throughout Europe and throughout the world. Brass is a sturdy alloy that is like bronze but much less expensive. These door hardware pieces are typically made of brass or steel, but they can be made from other materials. Brass is quite common, and there is a large selection of brass door handles on the market to suit any decorating style.

If modern is more your taste or keeping things traditional in your home, then try going for a more modernised look by complimenting your entryways with bronze door handles made from brass. Dull, lifeless brass door handles aren’t exactly a good choice for homes in keeping with a more modern aesthetic, especially ones with a more traditional aesthetic. Brass is a durable material and will stand up to the test of time and heavy use. It is an accessible material to clean and will prevent tarnishing from setting in. Simply wipe it down with a damp cloth once a week or so, and it should look and perform like new for years to come.

Cleaning can be tricky, especially for brass door handles, so you may want to consider purchasing a brass cleaning detergent to keep the tarnish at bay. You can also try some ammonia mixed with water and mild dish soap to clean the tarnish. If this doesn’t do the trick or you feel courageous, you can try spraying some rubbing alcohol onto the tarnish and allowing it to sit for a few minutes. You can also try wax on the tarnish if you don’t want to rub it off.

Another option would be to remove the tarnish with an old toothbrush and a little elbow grease. Be careful not to damage the finish on your bronze doors, as there are tiny plating imperfections in them that are impossible to spot without proper equipment. Just make sure you’re wearing the correct type of protective gloves, as the metal itself is still very soft, and your fingers could easily be nicked.

The next option would be to have the Brass Door Handles polished. This isn’t necessarily as popular as cleaning brass, but it is an option, nonetheless. Polished finishes are very friendly, especially when they match your existing finish on your antique brass door handles. Still, they can sometimes scratch or dull your antique brass door handles, particularly if you have an older antique piece in your home. There is a solution to this problem, however. If you have a small amount of rough metal around the edge of the door, all you need to do is to file it down until it is barely noticeable and then polish the unwanted scratches away.

If polishing doesn’t work, you may have to get your handles re-plated. It’s always possible that the tarnish was caused by dirt getting into the pores of the handles themselves. In this case, all you need to do is clean the door furniture again and then re-plate your handles. Again, make sure you use the correct type of plating gear – steel wool will do fine. This is the easiest solution, but to keep the tarnish off your antique door furniture for years to come, you will need to do it often.

Some homeowners find it helpful to use soapy water and a cotton cloth to remove any traces of tarnish. This works quite well, but it is also the easiest and least expensive way to remove the tarnish. Simply wet the soft cloth with soapy water and gently rub the tarnish away. Once you have done this a few times, you should have no problem removing most of the tarnish.

To clean the soiled parts of the Brass Door Handles, you will need a soft cloth, a soapy water solution, and a mild abrasive, such as baking soda or even metal polish remover. Dip the soft cloth into the solution and wipe away any excess dirt. Next, work the solution into the deep grooves and buff the surfaces until the solution has completely saturated the surface. You can also use the solution to scrape off the tarnish if necessary.

If you’re ready to shop for new brass door handles, go to loandcointeriors.com.au.